Our intro to studio lighting was interesting for me because it's something I've never done before in a professional studio environment.
We were given the essential set up for beauty photography that will be essential for the projects we are currently undertaking but they can also be adjusted to your preference, it is just important to get a good understanding of the equipment used and the way it all works together to create the overall effect of lighting the studio and lighting your model.
The essential photography equipment to have is
A camera
A hotshoe adapter
A memory card
Sync Lead
Tether Cable is using the computer
Essential studio equipment
Large and mini boom
Spill kill
Reflector
Modelling bulb and flash bulb - make sure they work on your light
Different umbrella's, shoot through and reflecting and soft boxes for different effects.
The set up and positioning of lights changed whether you had high key lighting or low key lighting, either lighting the model from the front onto the face or from the side or back.
It is essential to use a tripod for continuity in your work and its better to place your lighting directly above the camera to light your model for your shoot, of course lighting can be moved around for different effects but for beauty shoots it's better to have everything lined up, lights, camera and model.
The hotshoe adapter fits onto the top of the camera and links it up with the flash with the sync lead, it is essential to have this because the flash will not go off if you don't.
The camera settings are set to manual and the ISO is set to 100 and the shutter speed at 1/160. These are the standard settings for beauty photography and should be suitable for anything we will undertake.
These settings require a lot of light from the surroundings and require a flash so if you don't have the equipment you need you aren't going to get any images it will just be black.
If you use the tether cable and the computer you need a memory card to transfer your images or if not you need to put your memory card into the camera.
The spill kill is used on the end of the light you are using and it focuses the light onto your subject. The different umbrellas can then be attached to this.
Otherwise in place of the spill kill you can put either a soft box or a beauty dish depending on the effects you want to create and how you want the light to be diffused.
Lighting can also be altered on the light itself, the brightness of the modelling bulb can be adjusted and the flash can be turned up or down.
Health and safety is very important in a studio, Cables should be unwound to the full amount in case anyone catches them with their feet it wont pull anything over because there is enough to be dragged.
The tripods and lighting tripods must be set up so there is minimal chance of them falling over, the lights are very heavy and it is extremely dangerous to have a small tripod and it be extended all the way to the roof, instead you should use a boom arm to gain height.
You should create a pathway of sorts for your model in the shoots so there is less chance of accidents and keep them away from any equipment if possible.
I found this information absolutely essential and it all makes sense and is paramount to stick to to create a professional working environment. I'm excited to try out this set up and also to test my knowledge and memory skills on setting up a studio.
I will book studio time in my own time to practice with all these different pieces of equipment.
No comments:
Post a Comment